Cherry Hills Village Roofing Requirements: Everything Homeowners Need to Know

When planning a roofing project in Cherry Hills Village, it's essential to be familiar with the city's specific roofing requirements to ensure compliance, safety, and efficiency. This guide simplifies the official city roofing standards, giving you clarity on what's expected.

✅ 1. Roofing Permit Requirements

Cherry Hills Village mandates obtaining a building permit for any new roof installation, replacement, or major repairs. Ensure you submit your permit application to the city's Building Department and receive approval before starting any roofing project.

✅ 2. Inspection Guidelines

Cherry Hills Village requires roofing inspections at two critical stages:

• Mid-roof inspection: After underlayment installation but before covering it completely.

• Final inspection: Once the roof installation is entirely finished.

Scheduling these inspections timely is crucial to maintain compliance and avoid project delays.

✅ 3. Material Standards

All roofing materials must meet minimum standards established by the International Building Code (IBC) and International Residential Code (IRC).

Key material points include:

• Asphalt shingles must have a minimum Class A fire rating.

• Wood shingles and shakes must be pressure-treated for fire resistance and meet a minimum Class B fire rating.

• Concrete and clay tiles must be installed according to manufacturer specifications.

✅ 4. Ice and Water Shield Requirements

Cherry Hills Village requires installing ice and water shields in specific areas prone to ice dams, such as valleys, eaves, and around roof penetrations. Ice barrier underlayment should extend at least 24 inches inside the exterior wall line of the building.

✅ 5. Ventilation

Proper attic ventilation is mandated to extend roof life, prevent ice dams, and control interior moisture. Follow IRC standards for attic ventilation, typically involving a balance between intake (eaves or soffit vents) and exhaust vents (ridge or static vents).

✅ 6. Flashing and Valleys

• Valley flashing must be corrosion-resistant metal at least 24 inches wide or specialized valley lining.

• Drip edge flashing is required along eaves and rakes, installed under the underlayment at eaves and over underlayment at rakes.

• Flashing must be installed around all roof penetrations, chimneys, and intersections.

✅ 7. Weather Protection

All roofs must have adequate weather protection, including proper installation of roofing underlayment per manufacturer's guidelines. The underlayment should be water-resistant and capable of shedding water during roof installation.

✅ 8. Contractor Licensing and Insurance

All roofing contractors must be appropriately licensed with Cherry Hills Village and carry valid liability insurance. Always verify your contractor's credentials before beginning your project.

Quick Checklist for Compliance:

• Obtain the required permit.

• Schedule mid-roof and final inspections.

• Ensure materials meet IBC and IRC standards.

• Install ice and water shields appropriately.

• Provide sufficient attic ventilation.

• Correctly install flashing, drip edges, and weather protection.

• Use only licensed and insured roofing contractors.

By following these clear guidelines, Cherry Hills Village homeowners can ensure a smooth, compliant, and high-quality roofing project. For more information, contact Cherry Hills Village Building Department directly or consult a licensed local roofing expert.

Ready to Start Your Roofing Project in Cherry Hills Village?
Download the Official Roofing Guidelines Here →